<< Back to Machine Vision Lasers Main Page

HIGH PERFORMANCE LINE LASER MODULES FOR MACHINE VISION

 

Our high performance line laser modules for machine vision are designed with high performance and high reliability and exhibit features of IP67, dust and waterproof. Our lasers are widely used in various 2D/3D vision applications and inspection systems. Professionally constructed for visual field applications with fine stripes, uniform power distribution and clear edges, these lasers can maximize the imagine resolution and accuracy of machine visual applications.

 

Lasermate Group, Inc. provides customized line laser modules at different wavelengths and powers. Our modules' compact dimensions and high reliability structure make them easy to combine with various vision systems.

 

***Note: The lasers for machine vision are designated solely as OEM components for incorporation into the customer's end products. Therefore it is the customer's responsibility to comply with FDA requirements of FDA 21CFR, section 1040.10 and 1040.11 as complete laser product. 

 


 

GENERAL SPECIFICATIONS

 

MECHANICAL STRUCTURE FEATURES

  • Outline dimensions:

  • Protection class: IP67, dust and water proof

  • Connector plug: M12 plug / 4-pin

  • Thread: M20

ELECTRICAL PERFORMANCE INDICATORS

  • Power supply: Wide power input 5-30V DC (with wrong connection protection)

  • Current: 300mA (max)

  • Modulation function: TTL modulation and Analog input adjusting power

  • Max. modulation frequency: 100kHz (TTL)

  • Analog input signal: 0~2.5V (from min to max)

  • Indicator Light:

    • Color: Green

      • Status: Normally ON - Laser preheat indication, indicating that the laser is about to launch.

    • Color: Blue

      • Status: Normally ON - Laser is emitting.

      • Status: Flash - Warning: Laser internal temperature exceeds 55 degrees Celsius. The laser remains emitting. Please note that the flash will stop automatically when temperature drops to 55 degrees Celsius.

    • Color: Orange

      • Status: Normally ON - Circuit fault; laser stops emitting.

      • Status: Flash - Warning: Laser internal temperature exceeds 85 degrees Celsius. The laser remains emitting. Please note that the flash will stop automatically when temperature drops to 55 degrees Celsius.

    • Color: Red

      • Status: Normally ON - Input voltage range over-voltage or under-voltage; laser stops emitting.

OPTICAL PARAMETERS

  • Output Power: Max 150mW (dependent on wavelength)

  • Laser power: Continuously adjustable

  • Wavelength: 405nm, 637nm

  • Luminance uniformity: 85%, 80%, 75%, 70%, etc.

  • Straightness error: Less than 0.1%, 0.5%, 1%, etc.

  • Temperature and Power stability: Less than 0.5%, 1%, 3%, etc.

  • 85% peak power proportion in cross-section: 95%, 90%, 85%, 80%, etc.

  • Fan Angle: 7o, 10o, 15o, 30o, 45o, 60o, 75o, 90o

  • Working distance: 50~2000mm (Adjustable)

EXTERNAL CONDITIONS

  • Ambient temperature in operation: 10~50oC (dependent on wavelength)

  • Ambient temperature in storage: 10~80oC

  • Ambient temperature in operation: Max 90%, no frosting

LASER PERFORMANCE

  • Good laser line power uniformity

  • High proportion of laser cross-section 85% peak power

  • Small laser line straightness deviation

  • High laser power and temperature stability

 

DIFFRACTION PATTERN OPTIONS

  • Grid

  • Uniform round

  • Multi-line

  • Cross

HIGH PERFORMANCE LASER MODULES FOR MACHINE VISION

 

405nm High Performance Lasers for Machine Vision

  • Model No. MVH405-XYZ

  • Wavelengths: 405+/-5 nm

  • Output power: <1mW Class II laser (X=1), <5mW Class IIIa laser (X=5), >10mW Class IIIb laser (X=10), >30mW Class IIIb laser (X=30), >95mW Class IIIb laser (X=95)

  • Operating mode: CW and TTL/Analog option

  • Operating mode: CW (Y=C), CW with TTL (Y=T), CW with Analog (Y=A)

  • Fan Angle: 30o (Z=30), 45o (Z=45), 60o (Z=60); other fan angles (7o, 10o, 15o, 75o, 90o) may be available upon request.

  • Line width: ~0.04mm @ 120mm, ~0.07mm @ 250mm, ~0.12mm @ 500mm, ~0.24mm @ 1000mm, ~0.52mm @ 2000mm

  • Power supply: 5V DC; other options up to 30V DC may be available upon request.

637nm High Performance Lasers for Machine Vision

  • Model No. MVH637-XYZ

  • Wavelengths: 637+/-5 nm

  • Output power: <1mW Class II laser (X=1), <5mW Class IIIa laser (X=5), >10mW Clas IIIb laser (X=10), >30mW Class IIIb laser (X=30), >80mW Class IIIb laser (X=80)

  • Operating mode: CW (Y=C), CW with TTL (Y=T), CW with Analog (Y=A)

  • Fan Angle: 30o (Z=30), 45o (Z=45), 60o (Z=60); other fan angles (7o, 10o, 15o, 75o, 90o) may be available upon request.

  • Line width: ~0.04mm @ 120mm, ~0.07mm @ 250mm, ~0.12mm @ 500mm, ~0.24mm @ 1000mm, ~0.52mm @ 2000mm

  • Power supply: 5V DC; other options up to 30V DC may be available upon request.

<< Back to Machine Vision Lasers Main Page

PRODUCTS

VCSELs | Communication Lasers | Photodiode Receivers | Optical Transceivers | Fiber Optics | Optical Components 
 
Laser Diodes | Laser Modules | Laser Systems | Laser Accessories | Laser Products | Fiber Coupled LEDs

  For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

  CONTACT US | HOW TO ORDER | QUO & INFO REQUEST | TERMS & CONDITIONS

Information contained herein is considered typical data. Lasermate Group, Inc. reserves the right to change or modify specifications of products at any time without notice.

Copyright by Lasermate Group, Inc.. All rights reserved.