SL-Series 650 Laser Diode Modules with Compact Dimensions

Low Cost Φ6.5mm x L. 14.5mm 650nm Laser Diode Module

Model No. SL36501F3-A (650nm <1mW Class II Laser)
Model No. SL36503F3-A (650nm <5mW Class IIIa Laser)

Features

Compact 650nm Laser Diode Module
APC (Automatic Power Control) IC inside
Low current consumption of the APC circuit
Compact Dimensions of Dia. 4mm x L. 8.5mm
Surge current protection
High quality lens for output beam

ABSOLUTE MAXIMUM RATINGS

ITEM	Symbol	rating	unit
power supply voltage	V_CC	3.3	V
SL36501F3-A optical output power	P_O	<1	mW
SL36503F3-A optical output power	P_O	<3	mW
operation temperature	T_opr	0 to 40	^oC
storage temperature	T_stg	0 to 60	^oC

ELECTRICAL AND OPTICAL CHARACTERISTICS

ITEM		Symbol	min.	typ.	max.	unit	condition
wavelength		λ	645	655	660	nm	P_o = <3mW
output power	SL36501F3-A	P_out	0.4	0.6	0.99	mW	V_CC = 3V
output power	SL36503F3-A	P_out	2.2	-	3.0	mW	V_CC = 3V
operation current		I_op	-	-	35	mA	P_o = 3mW, V_CC = 3V
operation voltage		V_op	2.5	3	3.3	Volt
laser beam spot size at 10m		<20mm
divergence angle		2mrad
mean time to failure (mttf) @ 3mW, 25^oC		>10,000hrs

OUTLINE DIMENSIONS (unit: mm)

Pin Assignment:

Pin 1: Vcc
Pin 2: GND
Pin 3: NC
Note: brass case: -

INSTRUCTION MANUAL

LASER SAFETY PRECAUTIONS

1. Do not look into the laser beam directly by eyes. The laser beam may cause severe damage to human eyes.
2. Do not contaminate lens by soiling, oil or chemical.

Notes:

1. The SL-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, it is the customer’s responsibility to comply with FDA requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

2. The above specifications are subject to change without notice.

<< Back to Red & Infrared Laser Diode Modules Page

PRODUCTS

For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

CONTACT US | HOW TO ORDER | QUO & INFO REQUEST | TERMS & CONDITIONS

Information contained herein is considered typical data. Lasermate Group, Inc. reserves the right to change or modify specifications of products at any time without notice.