|
DIODE PUMPED SOLID-STATE
RML- SERIES 671nm RED LASER
|
|
|
|
|
Laser Head
|
Elite Power Supply
|
Laboratory
Power Supply
|
Diode
pumped solid state 671nm red laser is widely used in the application of spectrum analyzing, laser
display, and laser light show, etc. Our RML- series lasers are consisted of the laser head and
the AC power supply with complete FDA
compliant features and easy to operate (Elite Power Supply) or
more functions (Laboratory Power
Supply), such as the
adjustable output power knob, the operating current LED display, and
optional TTL/Analog modulations up to 10KHz. The features of RML- series
laser are
compact, long lifetime, low cost.
In
addition, the fiber coupled RML- series 671nm red lasers with FC or
SMA905 connector are also available. If interested, please send
the request to e-mail address paul@lasermate.com
for more detail information.
|
|
|
|
Model No.
|
RML-671-XFYD
|
RML-671-XFYE
|
RML-671-XFYA
|
|
Wavelength (nm)
|
671
|
|
Output power (mW)
|
< (X=5),
>50 (X=50), >100 (X=100), >200 (X=200), >300
(X=300)
|
|
Transverse mode
|
TEM00
|
|
Operating mode
|
CW
|
|
Power stability
(rms, over 4 hours)
|
<1%
|
<3%
|
<5%
|
|
Warm-up time
(minutes)
|
<15
|
|
M2
factor
|
<1.2
|
|
Beam divergence,
full angle (mrad)
|
<1.5
|
|
Beam diameter at
the aperture (mm)
|
~3.0
|
|
Beam height from
base (mm)
|
24.8
|
|
Spectral
linewidth (nm)
|
<0.1
|
|
Polarization
ratio
|
>100:1
|
|
Noise of
amplitude (rms)
|
~10%
|
|
Operating
temperature (oC)
|
10-35
|
|
Expected
lifetime (hours)
|
10,000
|
|
Laser
head dimensions (mm3)
|
140.8(L)×73(W) ×46.2(H)
|
|
Laser
head weight (kg)
|
0.6
|
|
Power
supply
|
Elite
Power supply (Y=E):
with
complete FDA compliant features, such as the turnkey switch and interlock,
and easy to operate; CW mode with optional TTL modulation up to 10KHz
Laboratory
Power supply (Y=L):
with complete FDA
compliant features, such as the turnkey switch and interlock, and
more functions; CW mode with the
adjustable output power knob, the operating current LED display, and
optional TTL/Analog modulations up to 10KHz
|
|
Power
supply input voltage
|
90-240VAC
|
|
Power
supply dimensions (mm3)
|
133(L) ×130(W) ×65(H) for Y=E; 154
(L) ×155(W) ×95 (H) for Y=L
|
|
Power
supply weight (kg)
|
1.2 for Y=E; 1.5 for Y=L
|
|
Warranty
|
10
months
|
|
Remark
|
The stability of output power is promised at the maximum output power
only. The stability of output power may change when you adjust the output
power. For example, the stability of output power at the maximum output power
is <5%, the stability may change to >5% when you adjust the output
power down.
|
Dimensions
of Laser Head & Power Supply (unit:
mm)
Laser Head
Elite Power Supply with turn key switch for 90-240VAC
Laboratory
Power Supply with turn key switch for 90-240VAC
The above specifications are
subject to change
without notice.
|
