Model No.

RML-635-XFYD

Wavelength (nm)

635+/-5

Output power (mW)

>100 (X=100), >200 (X=200), >300 (X=300), >400 (X=400), >500 (X=500), >600 (X=600), >800 (X=800), >1000 (X=1000)

Transverse mode

Near TE₀₀

Operating mode

CW

Power stability (rms, over 4 hours) at the Maximum Output Power

<1%

<3%

<5%

Warm-up time (minutes)

<5

M² factor

<20

Beam divergence, full angle (mrad)

<2.5

Dimensions of beam at the aperture (mm)

~5 x 8

Beam height from base (mm)

24.8 for X=100, 200, 300, 400 & 500

Polarization ratio

>50:1

Pointing stability after warm-up (mrad)

<0.05

Operating temperature (^oC)

10-35

Expected lifetime (hours)

10,000

Laser head dimensions (mm³)    

140.8(L)×73(W) ×46.2(H) for X=100, 200, 300, 400 & 500

136(L)×73(W) ×50(H) for X=600, 800 & 1000

Laser head  weight (kg)      

0.6

Power supply

Elite Power supply (Y=E): with complete FDA compliant features, such as the turnkey switch and interlock, and easy to operate; CW mode with optional TTL modulation up to 10KHz.

Laboratory Power supply (Y=L): with complete FDA compliant features, such as the turnkey switch and interlock,  and more functions; CW mode with the adjustable output power knob, the operating current LED display, and optional TTL/Analog modulations up to 10KHz

Supply voltage

90-240VAC included with turn key switch

Power supply dimensions (mm³)

133(L) ×130(W) ×65(H) for Y=E; 154 (L) ×155(W) ×95 (H) for Y=L

Power supply weight (kg)

1.2 for Y=E; 1.5 for Y=L

Warranty

10 months

(1) RML-635 is a multimode diode laser module, so the beam quality is not as good as the diode pumped solid-state 671nm laser, RML-671nm. The beam spot of RML-635 laser is nearly square.

(2) The stability of output power is promised at the maximum output power only. The stability of output power may change when you adjust the output power. For example, the stability of output power at the maximum output power is <5%, the stability may change to >5% when you adjust the output power down.