InGaAs PIN Photodiode Plus AGC Pre-amplifier for 1.25 Gbps Applications

Model No. PDT-A13P41

FEATURES: • Industry standard TO-46 package with cap lens. • Optimized for fiber optic application. • Bandwidth typical 920 MHz for 1.25 Gbps applications.

ELECTRO-OPTICAL CHARACTERISTICS:

PARAMETERS	SYMBOL	MIN	TYP	Max	UNIT	TEST CONDITIONS
Power Supply	VCC	3.0	-	5.5	V	-
Supply Current	ICC	-	26	50	mA	no loads
Maximum Differential Output Voltage	Vd	185	250	415	mVp-p	P= 0 dBm
Differential Responsivity	Rd	1.9	2.5	3.0	mV/mW	Rload =  100 ohm, P=-15 dBm @ 50 MHz, 1300 nm
Single Ended Responsivity	Rs	0.9	1.2	1.5	mV/mW	Rload =  50 ohm, P=-15 dBm @ 50 MHz, 130 nm
Small-Signal Bandwidth	BW	750	920	1100	MHz
Low-Frequency Cut Off	LF		44		kHz
Rise Time/Fall Time (20 - 80%)	Tr/Tf		300	400	ps	20 - 80%
Single Ended Output Impedance	Ro	48	50	52	Ohms	-
RMS Input Referred Noise		-	220	290	nW	-
RMS Output Referred Noise	Vn			1.6	mV	P = 0 dBm
Power Supply Rejection Ratio	PSRR		50		dB
Wavelength	l	1270	-	1380	nm

ABSOLUTE MAXIMUM RATINGS:

PARAMETERS	MIN     MAX	UNIT	CONDITIONS
Storage Temperature	-40       100	°C
Operating Temperature	-40        85	°C
Lead Solder Temperature	260	°C	10 seconds

Outline Dimensions:

Unit: mm

Pinout: (Bottom view)       ____   1. Dout   2. Dout   3. Vcc   4. Gnd