<< Back to Red & Infrared Laser Diode Modules Page

Class II Laser Diode Modules (PS-Series)

Meets Single Fault Requirements for IEC 60825-1, EN 60825-1 and JQA Compliances

The PS-series class II laser diode modules are designed with the driver PCB to meet Single Fault Failure Requirements for IEC 60825-1, EN 60825-1, and JQA (Japan Quality Assurance).

Features

  • Class II Laser Diode Modules

  • Wavelengths at 635nm, 650nm, 670nm

  • For IEC 60825-1, EN 60825-1 and JQA (Japan Quality Assurance) Compliances

  • Adjustable Focus or Fixed Focus

  • Circular or Elliptical Beam Shape

  • Automatic Power Control (APC) Circuit Design

  • Singlet plastic collimating lens

Specifications of PSC-Series Class II Laser Diode Modules (Circular Beam Profile)

Specifications of PSP-Series Class II Laser Diode Modules (Elliptical Beam Profile)


Specifications of PSC-Series Class II Laser Diode Modules

Model No.

PSC6351AJR

PSC6501AJR

PSC6701AJR

Wavelength (nm)

635 +/-10

650 +/-10

670 +/-10

Laser light

Visible Red

Laser class

Class II <1mW

Diode structure

Index guided

Optical output power

0.5-0.99mW

Operating current 

33 mA typical

25 mA typical  

38 mA typical  

Operating voltage

3-9 VDC

Drive circuit

APC (automatic power control) circuit that meets Single Fault Failure Requirements for IEC 60825-1, EN 60825-1, and JQA compliances 

Optics

Singlet plastic collimating lens

Beam divergence

< 0.5 mrad

Beam size @ 5 m

dia. ~5 mm

Beam profile

Circular

Focus

Standard: Adjustable (Optional: Fixed) *

Operating temperature

-10 to +50 oC

Connector

Black wire -, red wire + & brass case +

Dimensions

Brass case: Dia. 8mm x L. 18mm + PCB: L.10mm x W. 11mm

*The Model No. for Fixed Focus option for 635nm, 650nm, and 670nm laser module is PSC6351FJR, PSC6501FJR, and PSC6701FJR, respectively.

Notes:

1.      The PSC-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, it is the customerís responsibility to comply with FDA requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

2.      Additional heat sink may be needed if the laser module is operated continuously for a long period of time.

3.    The above specifications are subject to change without notice.

Specifications of PSP-Series Class II Laser Diode Modules  

Model No.

PSP6351AJR

PSP6501AJR

Wavelength (nm)

635+/-10

650+/-10

Laser light

Visible Red

Laser class

Class II <1mW

Diode structure

Index guided

Optical output power

0.5-0.99mW

Operating current 

33 mA typical

25 mA typical  

Operating voltage

3-9 VDC

Drive circuit

APC (automatic power control) circuit that meets Single Fault Failure Requirements for IEC 60825-1, EN 60825-1, and JQA compliances 

Optics

Singlet plastic collimating lens

Beam divergence

< 0.5 mrad

Beam size @ 5 m

~ 4 x 7 mm

Beam profile

Elliptic

Focus

Standard: Adjustable (Optional: Fixed) *

Operating temperature

-10 to +50 oC

Connector

Black wire -, red wire + & brass case +

Dimensions

Brass case: Dia. 8mm x L. 14.7mm + PCB: L.10mm x W. 11mm

 

*The Model No. for Fixed Focus option for 635nm and 650nm laser module is PSP6351FJR and PSP6501FJR, respectively.

 

Notes:

1.      The PSP-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, it is the customerís responsibility to comply with FDA requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

2.      Additional heat sink may be needed if the laser module is operated continuously for a long period of time.

3.    The above specifications are subject to change without notice.

<< Back to Red & Infrared Laser Diode Modules Page

PRODUCTS

VCSELs | Communication Lasers | Photodiode Receivers | Optical Transceivers | Fiber Optics | Optical Components 
 
Laser Diodes | Laser Modules | Laser Systems | Laser Accessories | Laser Products | Fiber Coupled LEDs

  For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

  CONTACT US | HOW TO ORDER | QUO & INFO REQUEST | TERMS & CONDITIONS

Information contained herein is considered typical data. Lasermate Group, Inc. reserves the right to change or modify specifications of products at any time without notice.

Copyright © by Lasermate Group, Inc.. All rights reserved.