Fiber Optic Diode Laser & LED Light Sources from 850nm to 1610nm lasers

Fiber Optic Diode Laser & LED Light Sources

1.1 Description

Fiber Optic Diode Laser or LED Light Source is a handy tool and instrument to provide you several different wavelengths to test the fiber equipment in the optical network and FTTx construction. Light Source is ideal for field or laboratory testing of optical communication system at 850 nm / 1300 nm for datacom testing, 1310 nm / 1550 nm / CWDM 1270 nm ~ 1610 nm ( 20 nm spans ) for all WDM testing , as well as 1490 nm for FTTx testing by changing interchangeable SFP module. Light Source features zero warm up, superb productivity and is easy to use with pocket-size and rugged and handy design.

With LC / SC patch cord, Fiber Optic Diode Laser or LED Light Source can be used for all the most widespread fiber interfaces such as LC / ST / SC / FC connector. It is suitable to test both Single mode and Multimode cables.

Internally there is also a specifically designed power circuit included; the APC (Automatic Power Control ) circuit provides steady power which avoids unstable laser output when the battery is low.

The LD output signal can be switched CW or Pulse Mode 270 Hz / 2 KHz Modulated Mode to simulate signal transmission. There is a dust proof cap which will prevent dust from getting into the inside of the LD connector. The cap also helps evade incidental exposure of the laser directly into your eyes.

1.2 Features

n Pocket-size & rugged & handy design.

n Needless to pre-warm-up time.

n Interchangeable SFP Module design with LC or SC connector.

n Flexible to change any wavelength.

n High stability of the Output Power.

n Excellent & stable output wavelength.

n Excellent re-connection repeatability.

n Low Voltage Battery warning signal in LED.

n Compatible to LC Connectors.

n Economic type and easy to use.

n Operates in CW ( Continuous Wave) or Pulse Mode 270 Hz / 2 KHz

n The dust-proof design keeps fiber connectors clean

n Two AAA-size alkaline batteries

n LED indicator for Power, Battery Low indicators

1.3 Applications

n Maintenance CATV / Telecom / FTTH in Singlemode or Multimode fiber optical fiber network.

n Standard laboratories.

n High throughput quality assurance.

2. Specification

Wavelength (nm)	850, 1300, 1310, 1550 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610,1625
Mode	CW / Pulse Mode 270 Hz / 2 KHz
Battery Type	AAA 1.5 V x 2
LED Indicator	Power On ( GREEN ) / Battery Low ( RED)
Output Power Accuracy	+/- 0.2 dB
Output Power Stability ( 1 HR )	+/- 0.05 dB
Operating Temp.	0 ^oC ~ 50^oC
Storage Temp.	0^oC ~ 70^oC

S200126X0850	Min.	Typ.	Max.	Unit	Note
850nm VCSEL Output Power	-5			dBm	@ 25℃ 62.5 / 125 µm fiber
Center Wavelength λC		850		nm	@ 25℃ 62.5 / 125 µm fiber
Spectral Width Δλ			0.85	nm	@ 25℃ 62.5 / 125 µm fiber

S200122X1300	Min.	Typ.	Max.	Unit	Note
1300nm LED Output Power	-22			dBm	@ 25℃ 62.5 / 125 µm fiber
Center Wavelength λC	1270	1300	1370	nm	@ 25℃ 62.5 / 125 µm fiber
Spectral Width Δλ (FWHM)		130	180	nm	@ 25℃ 62.5 / 125 µm fiber

S200123X1310	Min.	Typ.	Max.	Unit	Note
1310nm FP LD Output Power	-5			dBm	@ 25℃ 9 / 125 µm fiber
Center Wavelength λC	1290	1310	1330	nm	@ 25℃ 9 / 125 µm fiber
Spectral Width Δλ			<4	nm	@ 25℃ 9 / 125 µm fiber

S200123X1550	Min.	Typ.	Max.	Unit	Note
1550nm FP LD Output Power	-5			dBm	@ 25℃ 9 / 125 µm fiber
Center Wavelength λC	1520	1550	1570	nm	@ 25℃ 9 / 125 µm fiber
Spectral Width Δλ			<4	nm	@ 25℃ 9 / 125 µm fiber

S200124X1310	Min.	Typ.	Max.	Unit	Note
1310nm DFB LD Output Power	-3			dBm	@ 25℃ 9 / 125 µm fiber
Center Wavelength λC	1290	1310	1330	nm	@ 25℃ 9 / 125 µm fiber
Spectral Width Δλ			<1	nm	@ 25℃ 9 / 125 µm fiber

S200124X1550	Min.	Typ.	Max.	Unit	Note
1550nm DFB LD Output Power	-3			dBm	@ 25℃ 9 / 125 µm fiber
Center Wavelength λC	1530	1550	1570	nm	@ 25℃ 9 / 125 µm fiber
Spectral Width Δλ			<1	nm	@ 25℃ 9 / 125 µm fiber

S200125Xxxxx	Min.	Typ.	Max.	Unit	Note
1270nm - 1610nm CWDM LD Output Power	-3			dBm	@ 25℃ 9 / 125 µm fiber
Center Wavelength λC	λC *- 3	λC *	λC *+3	nm	@ 25℃ 9 / 125 µm fiber
Spectral Width Δλ			<1	nm	@ 25℃ 9 / 125 µm fiber
S200125Xxxxx-S	Min.	Typ.	Max.	Unit	Note
1270nm - 1610nm CWDM LD Output Power	3			dBm	@ 25℃ 9 / 125 µm fiber
Center Wavelength λC	λC *- 3	λC *	λC *+3	nm	@ 25℃ 9 / 125 µm fiber
Spectral Width Δλ			<1	nm	@ 25℃ 9 / 125 µm fiber

X=0 , LC Connector

X=1 , SC Connector

*CWDM LD λC:

S200125Xxxxx

1270 nm / 1290 nm / 1310 nm / 1330 nm / 1350 nm / 1370 nm / 1390 nm / 1410 nm / 1430 nm / 1450 nm / 1470 nm / 1490 nm / 1510 nm / 1530 nm / 1550 nm / 1570 nm / 1590 nm / 1610 nm / 1625 nm

3. Ordering & Price Information:

Part Number	Description	Unit Price
S20012009999	Light Source Main Frame	$90.00
S200126X0850	VCSEL 850 nm plug-in module	$135.00
S200122X1300	LED 1300 nm plug-in module	$135.00
S200123X1310	FP LD 1310 nm plug-in module	$145.00
S200123X1550	FP LD 1550 nm plug-in module	$160.00
S200124X1310	DFB LD 1310 nm plug-in module	$280.00
S200124X1550	DFB LD 1550 nm plug-in module	$300.00
S200125Xxxxx	CWDM LD λC plug-in module	$340.00
S200125Xxxxx-S	CWDM LD λC plug-in module (2 mW)	$390.00

X=0 , LC Connector X=1 , SC Connector *CWDM LD λC: xxxx 1270 nm / 1290 nm / 1310 nm / 1330 nm / 1350 nm / 1370 nm / 1390 nm / 1410 nm / 1430 nm / 1450 nm / 1470 nm / 1490 nm / 1510 nm / 1530 nm / 1550 nm / 1570 nm / 1590 nm / 1610 nm / 1625 nm

Note: You need to order one main frame (part number S20012009999) and at least one source, for example 1310nm FP laser with LC connector part number S20012301310, to perform the light source test.

The above specifications are subject to change without notice.

If you have any comments or request for detail product information, please fill the
Quotation & Information Request Form or e-mail to: info@lasermate.com.

HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST |