|
Infrared Diode Pumped Solid State Laser Modules
946nm, 1053nm, 1064nm, 1319nm & 1342nm up to 1000mW
Applications
- Measurement
- Light Source
- Spectrum analysis
|
|
|
|
|
Laser Head
|
Elite Power Supply
|
Laboratory
Power Supply
|
Diode
pumped solid state IR lasers are widely used in the application of collimation,
laser medical treatment, scientific experimentation, optics instrument, etc. Our
DP- series IR lasers are consisted of the laser head and the AC power supply with complete FDA
compliant features and easy to operate (Elite Power Supply) or
more functions (Laboratory Power
Supply), such as the
adjustable output power knob, the operating current LED display, and
optional TTL/Analog modulations up to 10KHz. The features of DP- series
laser are
compact, long lifetime, low cost.
In
addition, the fiber coupled DP- series infrared lasers with FC or SMA905
connector are also available. If interested, please send
the request to e-mail address paul@lasermate.com
for more detail information.
|
Model
No.
|
DP-946-XFYZN |
DP-1053-XFYZN
|
DP-1064-XFYZN
|
DP-1319-XFYZN
|
DP-1342-XFYZN
|
|
Wavelength
(nm)
|
946
|
1053
|
1064
|
1319
|
1342
|
|
Operating
mode
|
CW
|
|
Transverse mode
|
TEM00
|
|
Output
power (mW)
|
>300
(X=300), >200
(X=200),
>100 (X=100),
>50 (X=50)
|
>500
(X=500), >200
(X=200),
>100 (X=100),
>50 (X=50)
|
>1000(X=1000), >800
(X=800),
>500 (X=500), >300 (X=300),
>100
(X=100)
|
>500
(X=500), >300
(X=300),
>200 (X=200),
>100 (X=100), >50 (X=50)
|
>1000
(X=1000), >800
(X=800),
>500
(X=500),
>300(X=300), >200
(X=200) >100(X=100)
|
|
Laser
crystal
|
Nd:YAG
|
Nd:YLF
|
Nd:YVO4
|
Nd:YAG
|
Nd:YVO4
|
|
Spectral linewidth (nm)
|
<0.1
|
|
Power
supply
|
Elite
Power supply (Y=E): with
complete FDA compliant features, such as the turnkey switch and interlock,
and easy to operate; CW mode with optional TTL modulation up to 10KHz
Laboratory
Power supply (Y=L): with complete FDA
compliant features, such as the turnkey switch and interlock, and
more functions; CW mode with the
adjustable output power knob, the operating current LED display, and
optional TTL/Analog modulations up to 10KHz
|
|
Power
stability (rms, over 4 hours) at the Maximum Output Power
|
<1% (Z=D), <3% (Z=E), <5% (Z=A)
|
|
rms noise (1Hz-20MHz)
|
<1% (N=1)
low noise,
<5% (N=5)
|
|
Point stability after warm-up (mrad)
|
<0.05
|
|
M2
factors
|
<1.5
|
|
Beam
diameter at the aperture (1/e2) (mm)
|
~2.0
|
|
Beam height from the base (mm)
|
24.8
|
|
Beam
divergence, full angle (mrad)
|
<1.5
|
|
Warm-up time (minutes)
|
<15
|
|
Operating
temperature
(oC) |
10-35
|
|
Expected
lifetime (hours)
|
10,000
|
|
Laser
head dimensions (mm3)
|
140.8(L)×73(W) ×46.2(H)
|
|
Laser
head weight (kg)
|
0.6
|
|
Power
supply input voltage
|
90-240VAC
|
|
Power
supply dimensions (mm3)
|
133(L) ×130(W) ×65(H) for Y=E; 154
(L) ×155(W) ×95 (H) for Y=L
|
|
Power
supply weight (kg)
|
1.2 for Y=E; 1.5 for Y=L
|
|
Warranty
|
10
months
|
|
Remark
|
The stability of output power is promised at the maximum output power
only. The stability of output power may change when you adjust the output
power. For example, the stability of output power at the maximum output power
is <5%, the stability may change to >5% when you adjust the output
power down.
|
Dimensions
of Laser Head & Power Supply (unit:
mm)
Laser Head
Elite Power Supply with turn key switch for 90-240VAC
Laboratory
Power Supply with turn key switch for 90-240VAC
Note: The above specifications are subject to change
without notice.
|
