Professional Fiber Optic HDMI Extender via 2 multimode fibers with SC duplex connector extending HDMI link up to 200m or 656 feet

Professional Fiber Optic HDMI Extender via 2 multimode fibers

with SC Duplex Connector

Extending HDMI Link up to 200 meters or 656 feet

Description

HDMI (High-Definition Multimedia Interface) recently has become increasingly popular in the application of video and audio transmission system. In view of the extreme of electrical performances, however, the traditional copper wire cable imposes limits on signal transmission distance and signal quality. In reality, optical fiber is of low dispersion, which in turn has the strength of longer signal transmission distance and better signal transmission quality in comparison to the traditional copper wire cable. LASERMATE HDMI extender uses 2 cores fiber without any copper wire inside, where radio frequency interference phenomenon is literally ruled out, which shows the advantage of high performance and good signal quality as well as low cost.

Features

200m Long distance video and audio transmission
High resolution and image quality
HDCP fully compliant without copper wire
No RF Interference by optical fiber
Class 1 laser product complies with EN 60825-1
HDMI Type A connection

Application

Remote monitor for traffic, industrial, military control
LCD, Projector, Plasma display connection
Large video wall system
Theater

Ordering information

Part No.	Plug of 5V Adapter included
HDMI-TXRX-2SC-200	US plug
HDMI-TXRX-2SC-201	EU plug
HDMI-TXRX-2SC-202	BS plug

Package including

HDMI-TX-2SC-200 TX module x 1
HDMI-RX-2SC-200 RX module x 1
5V adapter x 2
HDMI cable x 1

* This product does not include the optical fiber.

Adapter Specification

PARAMETER	SPECIFICATION	NOTE
Input	100~240VAC	US plug (standard)
Output	DC 5V	1.0 A
DC Jack	Inside 5V / Outside ground


US Plug (standard)	ED Plug (optional)	BS Plug (optional)

Specification

Requirements

HDMI Source (DVD player or PC)
HDMI Sink (Monitor or Projector)
100~240VAC 50~60Hz 0.2A electricity

HDCP compliant

HDCP (High-bandwidth Digital Content Protection) is one kind of copy protection by digital signal handshake. It is required for HDMI device. The Extender plays the role of a cable to communicate all of HDMI functions, such as all TMDS, DDC, CEC and HPD signal.

Installation

Installation Step

1. Put ‘TX’ module near to HDMI signal source, such as DVD players or computers.

2. Put ‘RX’ module is near to HDMI sink, such as LCD TVs or Projectors.

3. Connect HDMI cable from TX to Source and from RX to Sink.

4. Plug in the optical fibers from TX to RX. Please pay attention to the indicative number if SC connector.

5. Plug in the 5V adapter to the electricity and TX/RX modules.

Note 1: Clean end face of fiber before plugging in. The dust will cause damage to the fiber.

Note 2: The length of HDMI cable should be NOT longer than 2 meters.

Note 3: These three figures in front of the modules represent linking status. These 3 LEDs blaze green if all setup is complete and correct. The left one stands for the connection of fiber. The middle one stands for the connection of HDMI source. The right one stands for the connection of HDMI source.

Optical fiber

HDMI source cable

HDMI sink cable

The above specifications are subject to change without notice.

If you have any comments or request for detail product information, please fill the
Quotation & Information Request Form or e-mail to: info@lasermate.com.

HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST |