|
1064 nm Diode Pumped
Solid-State Laser Module
Specifications of GMR- Series 1064 nm Diode Pumped
Solid State Laser Modules
| Model
No. |
GMR-1064-XFYCZ
|
| Wavelength |
1064nm |
| Mode |
TEMoo |
| Output Power (mW) @ 25 oC |
3-5
(X=5) |
>10
(X=10) |
>20
(X=20) |
>50
(X=50) |
>100
(X=100) |
| Operating Current (A) |
<0.4 |
<0.6 |
| PCB Driver |
9-15V DC
(Y=9); PCB driver in box with switch (Y=B)
|
| Focus |
Fixed
|
| Circuit Design |
ACC |
| Operation Mode |
CW with TTL
capable and up to 1KHz |
| M2 |
< 2 |
| Linewidth |
< 0.1 nm |
| Linear Polarization |
Standard ³4:1(Z=1);
Optional ³100:1(Z=2)
|
| Beam Divergence |
<1.4 mrad |
| Beam Diameter (1/e2) |
< 1 mm |
| Stability* |
£
±15% @ 25 ± 3 oC |
| Over
Heat Protection |
Optional for Y=9 |
| AC adapter |
Included for Y=B, No for Y= 9
|
| Connector |
For Y=9: Black (-) & red (+) wires for CW & Jump
for TTL
For Y=B: DC-Jack for CW & BNC for TTL
|
| Storage Temperature |
10 - 50 oC |
| Optimum Operating Temperature |
22-28 oC |
| MTTF** |
5,000 hrs |
| Dimensions (LxWxH) |
50
x 21 x 21 mm (green laser head) For
Y=9, W. 40 x L. 37.5 x H. 38 mm (PCB driver including heat sink)
For Y=B, W. 60 x L. 80 x H. 45.5 mm (PCB driver in box)
|
* Additional heat sink or cooling fan may be needed to stabilize
the output power of laser module.
** MTTF (mean time to failure) is based on the MTTF rating of high
power 808nm laser diode used from the laser diode manufacturer.
The GMR-series 1064 nm Diode Pumped Solid State Laser Modules,
which use laser diode pumped Nd:YVO4 crystal coupled with KTP
as a frequency doubbler, are designated solely as OEM components for incorporation
into the customer's end products. Therefore, they do not comply with the
appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for
complete laser products.
Mechanical Outline:
PCB Driver Outline
|
9-15V PCB
Y=9
|
|
|
Subassembly
PCB in box
with Switch Y=B
|
 
|
The specification is subject to change without notice.
|
