GMP- Series 532
nm DPSS Green Laser Modules
|
Key Features:
|
|
Specifications of GMP- Series 532 nm DPSS Green Laser Modules
| Model No. |
GMP-532-XF3-CPY
|
| Wavelength |
532 nm
|
| Mode |
TEMoo
|
| Output power (mW) @ 3VDC, 25 oC |
0.5-0.99 (X=1)
|
3-4.99 (X=5)
|
7-10 (X=10)
|
16-20 (X=20)
|
| Laser class |
class II
|
class IIIa
|
class IIIb
|
class IIIb
|
| Laser beam off the
center axial of brass housing |
£+/-5 degree (Y= blank); £+/-3
degree (Y=B3); £+/-1.5 degree (Y=B1)
|
| Operating Current (A) |
<0.30
|
| Operating Voltage |
3V DC
|
| Circuit Design |
APC with limited current, CW operation mode
|
| Stability* |
£ ±5% @ the constant temperature
|
| M2 |
< 2
|
| Linewidth |
< 0.1 nm
|
| Polarization |
Linear
|
| Beam Divergence |
<1.2 mrad
|
| Beam Diameter (1/e2) |
< 2 mm
|
| Connector |
Standard: Black wire (-); red wire & brass case (+)
|
| Length of wires |
10 cm
|
| Storage Temperature |
10 - 50 oC
|
| Optimum Operating Temperature |
20 - 30 oC
|
| Expected Life Time |
>3,000 hr
|
| Dimensions (LxW) |
For
Y=blank and Y=B3:
Dia. 12mm x L. 31.3+/-0.5 mm (green
laser head),
W. 9 x L. 16 mm (driver circuit board)
For
Y=B1:
Dia. 12mm x L. 35+/-0.5 mm (green laser
head),
W.
9 x L. 16 mm (driver circuit board) |
* Additional heat sink or cooling fan
may be needed to stabilize
the output power of laser module if the laser module is operated continuously in
a period of time.
The GMP-series 532 nm Diode Pumped Solid State Green Laser Modules,
which use laser diode pumped Nd:YVO4 crystal coupled with KTP
as a frequency doubbler, are designated solely as OEM components for incorporation
into the customer's end products. Therefore, they do not comply with the
appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for
complete laser products.
Note: Specifications subject to change without
notice. |
