<< Back to Laser Modules Main Page

GMP-Series 515nm Green Laser Diode Modules
With APC Circuit Design and Compact Size

Model No. GMP-515-XF5

Specifications of GMP-Series 515nm Green Laser Diode Modules

Model No. 

GMP-515-XF5

Wavelength

515+/-10 nm

Output power (mW) @ 25 oC

0.5-0.99 (X=1)

3-4.99 (X=5)

Laser Class

Class II

Class IIIa

Operating Current(1) @ 25 oC

<300mA (typical 250mA @ 3VDC, typical 150mA @5VDC)

Operating Voltage

3-5V DC

Circuit Design

APC (Automatic Power Control)

Operation Mode

CW

Beam Divergence

< 1 mrad

beam mode

TEM00

Beam Diameter

< 2mm at aperture

Stability(2)

≤ ±5% @ constant temperature

Connector

Black wire(-); red wire (+)

Housing

Anodized aluminum

operating Temperature

-10 to 50 oC

Storage Temperature

-10 to 70 oC

Dimensions (LxWxH)

Dia. 12mm x L. 17.5+/-0.5 mm (Anodized aluminum housing) + 
W. 11mm x L. 18mm (driver circuit board)

Notes:

1.       If you run this laser module with DC power supply, please set the current of DC power supply between 1A and 0.9A.  

2.       Additional heat sink or cooling fan may be needed to disperse the heat and to avoid the laser module overheated.

3.       The GMP-series laser modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, it is the customer’s responsibility to comply with FDA requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

4.       The above specifications are subject to change without notice.

MECHANICAL OUTLINE (unit: mm)

Note: The above specifications are subject to change without notice.

<< Back to Laser Modules Main Page

PRODUCTS

VCSELs | Communication Lasers | Photodiode Receivers | Optical Transceivers | Fiber Optics | Optical Components 
 
Laser Diodes | Laser Modules | Laser Systems | Laser Accessories | Laser Products | Fiber Coupled LEDs

  For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

  CONTACT US | HOW TO ORDER | QUO & INFO REQUEST | TERMS & CONDITIONS

Information contained herein is considered typical data. Lasermate Group, Inc. reserves the right to change or modify specifications of products at any time without notice.

Copyright © by Lasermate Group, Inc.. All rights reserved.