GME- Series
532 nm DPSS Green Laser Modules with APC circuit
|
APC 9-15VDC PCB |
Specifications
of GME- Series 532 nm DPSS Green Laser Modules
| Model No. |
GME-532-XFYP-Z
|
| Wavelength |
532 nm
|
| Mode |
TEMoo
|
| Output power (mW) @ 25 oC |
0.5-0.99
(X=1)
|
1.5-3
(X=3)
|
3-5
(X=5)
|
8-10
(X=10)
|
| Operating Current (A) |
<0.40
|
<0.60
|
| PCB
Driver |
9-15V DC
(Y=9); PCB driver in box with switch (Y=B)
|
| Focus |
Fixed
|
| Circuit Design |
APC
|
| Operation Mode |
CW
|
| M2 |
< 2
|
| Linewidth |
< 0.1 nm
|
| Linear Polarization |
Standard ³4:1(Z=1);
Optional ³100:1(Z=2)
|
| Beam Divergence |
<1.4 mrad
|
| Beam Diameter (1/e2) |
< 1 mm
|
| Output
Power Stability |
<±5% (typical <1%)
|
| Connector |
Black (-) & red (+) wires
|
| Storage Temperature |
10 - 50 oC
|
| Optimum Operating Temperature |
20-30 oC
|
| MTTF* |
>5,000 hrs
|
| Dimensions (LxWxH) |
50
x 21 x 21 mm (green laser head):
(Mounting holes: Front: 4- M3 x P0.5 and
depth 5mm; Bottom: 4- M2 x P0.4 and depth 4mm)
For Y=9, W. 40 x L. 37.5 x H. 38 mm (PCB driver including heat sink)
For Y=B, W. 60 x L. 80 x H. 45.5 mm (PCB driver in box)
|
* MTTF (mean time to failure) is based on the MTTF rating of high
power 808nm laser diode used from the laser diode manufacturer.
The GME-series 532 nm Diode Pumped Solid State Green Laser Modules,
which use laser diode pumped Nd:YVO4 crystal coupled with KTP
as a frequency doubbler, are designated solely as OEM components for incorporation
into the customer's end products. Therefore, they do not comply with the
appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for
complete laser products.
|
Typical Test Data of the Stability of Optical Output
Power for 1 hr |
|
|
PCB Driver Outline
|
9-15V PCB
Y=9
|
|
|
Subassembly
PCB in box with Switch Y=B
|
 
|
|
