VCSELs  | Communication Lasers  | Photodiode Receivers | Fiber Optical Transceivers  | Electroluminescent Products | LED Modules

GMC- Series 532 nm DPSS Green Laser Modules 

9-15VDC PCB Version (Y=9)

Specifications of GMC- Series 532 nm DPSS Green Laser Modules 

Model No.	GMC-532-XFYCZ
Wavelength	532 nm
Mode	TEMoo
Output Power (mW) @ 25 oC	>10 (X=10)	>20 (X=20)	>30 (X=30)
Operating Current (A)	<0.60
PCB Driver	9-15V DC (Y=9); PCB driver in box with switch (Y=B)
Focus	Fixed
Circuit Design	ACC
Operation Mode	CW with TTL capable and up to 1KHz
M2	< 2
Linewidth	< 0.1 nm
Linear Polarization	Standard ³4:1(Z=1); Optional ³100:1(Z=2)
Beam Divergence	<1.4 mrad
Beam Diameter (1/e2)	< 1 mm
Stability*	£ ±20% @ 25 ± 3 oC
Over Heat Protection	Optional for Y=9
AC adapter	Included for Y=B, No for Y= 9
Connector	For Y=9: Black (-) & red (+) wires for CW & Jump for TTL For Y=B: DC-Jack for CW & BNC for TTL
Storage Temperature	10 - 50 oC
Optimum Operating Temperature	22-28 oC
MTTF**	5,000 hrs
Dimensions (LxWxH)	Dia. 21 x 50 mm  (green laser head)   For Y=9, W. 40 x L. 37.5 x H. 38 mm (PCB driver including heat sink) For Y=B, W. 60 x L. 80 x H. 45.5 mm (PCB driver in box)

* Additional heat sink or cooling fan may be needed to stabilize the output power of laser module.
** MTTF (mean time to failure) is based on the MTTF rating of high power 808nm laser diode used from the laser diode manufacturer.

The GMC-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO₄ crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. 

PCB Driver Outline

9-15V PCB Y=9
Subassembly PCB in  box with Switch Y=B