| Focusable GMA- Series
532 nm DPSS Green Laser Modules with APC & ACC circuits
<10mW with APC circuit (output power
stability <+/-5%)
>10mW with ACC circuit (output power
stability <+/-20%)
|
9-15VDC PCB Version (Y=9) |
Specifications
of GMA- Series 532 nm Green Laser Modules <10mW with APC circuit
| Model No. |
GMA-532-XAYPZ
|
| Wavelength |
532 nm
|
| Mode |
TEMoo
|
| Output Power (mW) @ 25 oC |
0.5-0.99 (X=1)
|
1.5-3.0 (X=3)
|
3-4.99 (X=5)
|
8-10 (X=10)
|
| Circuit Design |
APC
|
| Stability* |
£ ±5% @ 25 ±
3 oC
|
| Operating Current (A) |
<0.40
|
<0.60
|
| PCB Driver |
9-15V DC
(Y=9); PCB driver in box with switch (Y=B)
|
| Focus |
Adjustable focus from 5 cm to infinity
|
| Operation Mode |
CW
|
| M2 |
< 2
|
| Linewidth |
< 0.1 nm
|
| Linear Polarization |
Standard ³4:1(Z=1);
Optional ³100:1(Z=2)
|
| Beam Divergence |
<1.4 mrad
|
| Beam Diameter (1/e2) |
< 1 mm
|
| Over Heat
Protection |
Optional for Y=9
|
| AC adapter |
Included for Y=B, No for Y= 9
|
| Connector |
For Y=9: Black (-) & red (+) wires for CW, no
TTL modulation
For Y=B: DC-Jack for CW, no TTL modulation
|
| Storage Temperature |
10 - 50 oC
|
| Optimum Operating Temperature |
22-28 oC
|
| MTTF** |
5,000 hrs
|
| Dimensions (LxWxH) |
Dia. 17 x 30 mm + 20 x 20 x 20 mm
(green laser head)
(Mounting holes: Bottom: 2- M2
x P0.4 and depth 4mm)
For Y=9, W. 40 x L. 37.5 x H. 38 mm (PCB driver including heat
sink)
For Y=B, W. 60 x L. 80 x H. 45.5 mm (PCB driver in box)
|
* Additional heat sink or cooling fan may be needed to stabilize
the output power of laser module.
** MTTF (mean time to failure) is based on the MTTF rating of high
power 808nm laser diode used from the laser diode manufacturer.
The GMA-series 532 nm Diode Pumped Solid State Green Laser Modules,
which use laser diode pumped Nd:YVO4 crystal coupled with KTP
as a frequency doubbler, are designated solely as OEM components for incorporation
into the customer's end products. Therefore, they do not comply with the
appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for
complete laser products.
Specifications
of GMA- Series 532 nm Green Laser Modules >10mW with ACC circuit
| Model No. |
GMA-532-XAYCZ
|
| Wavelength |
532 nm
|
| Mode |
TEMoo
|
| Output Power (mW) @ 25 oC |
>10(X=10)
|
>20 (X=20)
|
>30 (X=30)
|
| Circuit Design |
ACC
|
| Stability* |
£ ±20% @ 25 ±
3 oC
|
| Operating Current (A) |
<0.60
|
| PCB Driver |
9-15V DC
(Y=9); PCB driver in box with switch (Y=B)
|
| Focus |
Adjustable focus from 5 cm to infinity
|
| Operation Mode |
CW with TTL capable and up to 1KHz
|
| M2 |
< 2
|
| Linewidth |
< 0.1 nm
|
| Linear Polarization |
Standard ³4:1(Z=1);
Optional ³100:1(Z=2)
|
| Beam Divergence |
<1.4 mrad
|
| Beam Diameter (1/e2) |
< 1 mm
|
| Over Heat
Protection |
Optional for Y=9
|
| AC adapter |
Included for Y=B, No for Y= 9
|
| Connector |
For Y=9: Black (-) & red (+) wires for CW & Jump for TTL
For Y=B: DC-Jack for CW & BNC for TTL
|
| Storage Temperature |
10 - 50 oC
|
| Optimum Operating Temperature |
22-28 oC
|
| MTTF** |
5,000 hrs
|
| Dimensions (LxWxH) |
Dia. 17 x 30 mm + 20 x 20 x 20 mm
(green laser head)
(Mounting holes: Bottom: 2- M2
x P0.4 and depth 4mm)
For Y=9, W. 40 x L. 37.5 x H. 38 mm (PCB driver including heat
sink)
For Y=B, W. 60 x L. 80 x H. 45.5 mm (PCB driver in box)
|
PCB Driver Outline
|
9-15V PCB
Y=9
|
|
|
Subassembly
PCB in box with Switch Y=B
|
 
|
|
