|
DIODE PUMPED SOLID-STATE
DP
SERIES 914nm IR
LASER
|
|
|
|
|
Laser Head
|
Elite Power Supply
|
Laboratory
Power Supply
|
Diode
pumped solid state 914nm IR laser is widely used in the application of collimation,
laser medical treatment, scientific experimentation, optics instrument, laser
display, and laser light show, etc. Our
GML- series green
lasers are consisted of the laser head and the AC power supply with complete FDA
compliant features and easy to operate (Elite Power Supply) or
more functions (Laboratory Power
Supply), such
as the adjustable output power knob, the operating current LED display, and
optional TTL/Analog modulations up to 10KHz. The features of
DP- series IR laser are compact, long lifetime, low cost.
In
addition, the fiber coupled DP- series 914 nm green lasers with FC or SMA905
connector are also available. If interested, please send
the request to e-mail address paul@lasermate.com
for more detail information.
|
Model No.
|
DP-914-XFYZ
|
|
Wavelength
(nm)
|
914+/-1
|
|
Output
power (mW)
|
>100(X=100), >200(X=200), >400(X=400)
|
|
Transverse
mode
|
Near TEM00
|
|
Operating
mode
|
CW
|
|
Power
stability (rms, over 4 hours)
at the Maximum output power
|
<1%
(Z=D),
<3% (Z=E),
<5%
(Z=A)
|
|
Warm-up
time (minutes)
|
<10
|
|
M2
factor
|
<1.2
|
|
Beam
divergence, full angle (mrad)
|
<1.5
|
|
Beam
diameter at the aperture (mm)
|
~2.0
|
|
Beam
height from base (mm)
|
24.8
|
|
Polarization
ratio
|
>100:1 (0 or 90 degree)
|
|
Pointing stability after
warm-up (mrad)
|
<0.05
|
|
Operating
temperature (oC)
|
10-35
|
|
Expected
lifetime (hours)
|
10,000
|
|
Dimensions
of laser head (mm3)
|
140.8(L)×73(W) ×46.2(H)
|
|
Net
weight of laser head (kg)
|
0.6
|
|
Power Supply
|
Elite
Power supply (Y=E): with
complete FDA compliant features, such as the turnkey switch and interlock,
and easy to operate; CW mode with optional TTL modulation up to 10KHz
Laboratory
Power supply (Y=L): with complete FDA
compliant features, such as the turnkey switch and interlock, and
more functions; CW mode with the
adjustable output power knob, the operating current LED display, and
optional TTL/Analog modulations up to 10KHz
|
|
Power
Supply
Voltage
|
90-240 V AC
|
|
Dimensions
of power supply (mm3)
|
133(L) ×130(W) ×65(H) for Y=E; 154
(L) ×155(W) ×95 (H) for Y=L
|
|
Weight
of power supply
(kg)
|
1.2 for Y=E; 1.5 for Y=L
|
|
Warranty
time
|
10 months
|
|
Remark
|
The stability of output power is promised at the maximum output power
only. The stability of output power may change when you adjust the
output power. For example, the stability of output power at the maximum output power
is <5%, the stability may change to >5% when you adjust the output
power down.
|
|
Dimensions
of Laser Head & Power Supply (unit:
mm)
Laser Head
Elite Power Supply with turn key switch for 90-240VAC
Laboratory
Power Supply with turn key switch for 90-240VAC
|
The above specifications are
subject to change
without notice.
|
